Jiangsu Lebron Machinery Technology Co., Ltd.
Jiangsu Lebron Machinery Technology Co., Ltd.
Add to Cart
Hat Channel Forming Drywall Light Steel Keel Roll Forming Machine Full Automatic
1. Description of the light steel keel roll forming machine
A light steel keel roll forming machine that manufactures steel roofing and ceiling battens (typically HAT shaped purlins) is known as roof batten roll forming machine or ceiling batten roll forming machine.
The steel battens work most of time as roofing and ceiling. Steel roof and ceiling battens are light yet strong, offering an economical alternative to timber battens. Manufactured from hi-tensile zinc/Al steel, the battens are capable to remain straight and consistent throughout their long life.
The common reasons for applying steel roof and battens are as following:
Helps to prevent plasterboard from cracking, which can happen when directly fixing the lining boards to timber.
It’s easy to obtain a flat level ceiling even if the timber is uneven.
Fixing of ceiling batten along with some clips will reduce the impact of noise between the top and bottom floor in a residential house.
Timber shrinkage is less likely to affect steel battened linings.
Less chance for call-back maintenance saves time and money.
2. Major technical parameters of the light steel keel roll forming machine
| No. | Item | Description |
| 1 | Roll Diameter | Dia 70mm |
| 2 | Forming Roller stand | 14 stations |
| 3 | Roller material | 45# steel coated with hard chrome |
| 4 | Forming speed | 0-12 m/min |
| 5 | Machine Frame stand | Welded structural steel |
| 6 | Thickness of stands mounted plates | 18mm |
| 7 | Main power | 5.5 KW |
| 8 | Cutting type | Hydraulic stop-to-cut |
| 9 | Hydraulic power | 3 KW |
| 10 | Material of cutting blade | Cr12 Steel with quenching treatment |
| 11 | Electrical control system | Panasonic PLC with inverter, Omron encoder |
| 12 | Voltage | 380V, 3 Phase 50Hz |
3. Main components of the light steel keel roll forming machine
| No. | Item | Quantity |
| 1 | Uncoiler | 1 Set |
| 2 | Guide Device | 1 Set |
| 3 | Roll Forming Machine | 1 Set |
| 4 | Hydraulic Station | 1 Set |
| 5 | Ran-out Table | 2 Sets |
4. Quality Guarantee
The Seller shall guarantee the goods with materials and workmanship in accordance with the required on the drawings, brand new, unused and correspond in all respects with the quality, specification and performance as stipulated in drawings and guarantee a good smooth operation for 12 months after the date of shipment (except consumables). This guarantee excludes the parts that require normal plant maintenance. The guarantee is strictly limited to the repairing and the replacing of the mechanical parts supplied by us found to be defective provided that failure has occurred during the ordinary use of the equipment and it is not accepted and claim due to damage to people, property or loss of production.
