Jiangsu Lebron Machinery Technology Co., Ltd.
Jiangsu Lebron Machinery Technology Co., Ltd.
Add to Cart
Long Time Service Corrugated Sheet Roll Forming Machine PLC Control Hydraulic Cut
1. Product Description
automatic water ripple roofing corrugated sheet roll forming machine
| No | Item | Parameter | Note | |
| 1 |
Suitable Material
| Type | roofing corrugated sheet roll forming machine |
roll forming machine |
| Customized Profile | ||||
| Thickness | 0.3-0.7mm | |||
| Yield Strength | 235MPA | |||
| 2 | Product Specs | Cover width | Customized Profile | |
| Length | Any length | |||
|
3
| Power Specs | voltage | 380V/3PH/50HZ | Up to Practical Profile |
| Main Motor | 3-11KW | |||
| Hydraulic | 2.2-5.5KW | |||
| 4 | Machine Specs | Transmission | Chain and Sprocket | Gearbox and Cardan Acceptable |
| Structure | Column Block Or Wall Plate | |||
| Shafter | No.45 steel tempered | |||
| Rollers | No.45 steel chrome coated | Cr12 or other acceptable | ||
| Cutting Blade | Cr12 quenched | |||
| Press Mould | Cr12 quenched | |||
| Punch Mould | Cr12 quenched | |||
| 5 | Working Capacity | Forming Speed | 15-20m/min for standard solution | Higher Speed Solution Available |
| Working Speed | Up to Length-set Cutting | |||
| 6 | Hydraulic Cantilever Decoiler (Optional) | Type | Hydraulic | |
| Max. Capacity | 5 T/10T/15T | |||
| Suitable coil OD | 1200mm | |||
| Suitable coil ID | 508/610mm | |||
| Max Coil width | 1250mm | |||
| 7 | Forming Stand | 8-48 | Up to Practical Profile | |
| 8 | Forming Shaft Diameter | 55-120mm | Up to Practical Profile | |
| 9 | Type of Cutting | Length-set cutting after roll formed,CR12 mould steel | Pre-cutting acceptable | |
| 10 | Control System | Mitsubishi PLC and Inverter | ||
| 11 | Output Supporter | 2 Pcs Simple Supporter | Auto Stacker Optional | |
2. Technical Specification
| No | Technical Specification | |
| 1 | Manual Uncoiler | Usage:It is used to support the steel coil and uncoil it in a turnable way. The steel coil is uncoiled by hand. Loading capacity:1.2T,Inner diameter: 500-508mm |
| 2 | Feeding Table | Put the raw material(steel plate) through the beach to manufacture and process, it can guarantee that the products are neat, parallel and everything is uniformity. Please refer to the equipment regulation to know the function of locate angle iron. |
| 3 | Main Roll Forming Machine | Material of rollers:45# steel,roller surfaces polishing, hard plating , The polished surface and the heat treatment towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stamped |
| 4 | Hydraulic System Computer Control Cabinet | Power:5.5kw,Hydraulic oil: 40# hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job. The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use PLC:EURA |
| 5 | Shearing Mechanism | It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products. Material of blades: Cr12,quenching treatment |
| 6 | Output Table
| It adopts welded steel and supported roller to transmit the products,which is used to collect the finished products. |
3. Packaging and shipping: roll forming machine
1). Tighten to container with steel wire rope and welded machine with container by angel iron
2). Main forming machine and un-coiler is naked(If you need we can also packed with water-proof plastic)
3). PLC contral system and motor pump are packed in wooden box with water proof paper coverage
5. Layout of highway guardrail roll forming machine:
6. Our service
1). Presale Service
We assist customers in well understanding the product information like features, functions and applications and so on. As for the detailed procuring information or drawings, our professionals will first conduct a careful examination and then recommend the most suitable machines or devise proper schemes for customers. We also provide free samples if necessary.
2). After-Sale Service
a. 12 months warranty is provided.
b. Customers can send photos or samples for our confirmation once the parts are damaged within the one year warranty. If the parts are not damaged by wrong operation, we will reply to customers within 48 hours and provide free parts for replacement. Besides, for the parts out of commission and beyond the warranty, we only charge for the basic costs of parts.
c. We regularly follow up the service condition of products, and timely analyze and copy with the feedbacks. As for the disputes, we will figure out effective actions to reach mutual satisfaction.